View MAX11040K_4791946.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

general description the MAX11040K evaluation kit (ev kit) is a fully assem- bled and tested pcb that evaluates the ic? 4-channel, simultaneous-sampling adc. the ev kit also includes windows 2000-, windows xp -, and windows vista - compatible software that provides a simple graphical user interface (gui) for exercising the ic? features. the ev kit comes with two MAX11040Kguu+s installed on the motherboard. up to three more parts can be connected to the ev kit to increase the number of input channels by cascading up to three daughterboards to the ev kit (order separately). features ? eight simultaneous adc channel inputs (ev kit only) ? up to 20* simultaneous adc channel inputs with the ev kit and the daughterboards ? four banana jacks for power-supply inputs ? bnc connectors on channel 0 and channel 1 for the ev kit and daughterboard for the signal inputs ? autofrequency, rms, min, max, and average dc calculations in the ev kit software ? usb-pc connection ? proven pcb layout ? windows 2000-, windows xp-, and windows vista (32-bit)-compatible evaluation software ? fully assembled and tested evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ________________________________________________________________ maxim integrated products 1 19-6133; rev 0; 11/11 component lists for pricing, delivery, and ordering information, please contact maxim direct at 1-888-629-4642, or visit maxim? website at www.maxim-ic.com. MAX11040K ev kit *the ev kit design limits 20 adc channel inputs; however, the ic supports up to 32 adc channel inputs when designed in a system using eight ics. designation qty description ain0-, ain0+, ain1-, ain1+ 4 75 , 4-pin bnc female jack receptacles, 0.250in spacing (top mount) avdd, agnd, dvdd, dgnd 4 uninsulated banana jacks c1, c2, c4, c5, c10, c11, c13, c14, c22, c23, c25, c26, c30, c31, c33, c34, c46, c47 18 10pf 5%, 50v c0g ceramic capacitors (0603) tdk c1608c0g1h100j c3, c6, c7, c8, c12, c15, c16, c18, c20, c24, c27, c28, c32, c35, c36, c37, c40 17 1f 10%, 10v x7r ceramic capacitors (0603) tdk c1608x7r1a105k c9, c17, c19, c21, c29, c38, c48, c59, c64Cc78, c80Cc99, c101Cc104 47 0.01f 10%, 50v c0g ceramic capacitors (0603) tdk c1608c0g1e103k designation qty description c39, c50Cc55, c60, c62, c63 10 0.1f 10%, 16v x7r ceramic capacitors (0603) tdk c1608x7r1c104k c41 1 22f 10%, 6.3v x5r ceramic capacitor (0805) tdk c2012x5r0j226k c42 1 4.7f 10%, 6.3v x5r ceramic capacitor (0603) tdk c1608x5r0j475m c43, c44, c45, c57, c58, c61, c107, c108, c111Cc126 0 not installed, ceramic capacitors (0603) c49 1 10f 10%, 4v x5r ceramic capacitor (0603) tdk c1608x5r0g106k c79 1 22f 20%, 6.3v x7r ceramic capacitor (1206) tdk c3216x7r0j226m ordering information appears at end of data sheet. windows, windows xp, and windows vista are registered trademarks of microsoft corp.
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 2 _______________________________________________________________________________________ component lists (continued) designation qty description r56 1 100k 5% resistor (0603) rn1Crn5 5 33 , 8-pin/4-resistor smt resistor networks panasonic exb-28v330jx rn6 1 10k , 16-pin/8-resistor smt resistor network panasonic exb-2hv103jv rn7Crn11 5 33 , 16-pin/8-resistor smt resistor networks panasonic exb-2hv330jv rn12 1 2.2k , 16-pin/8-resistor smt resistor network panasonic exb-2hv222jv rn13 1 1k , 8-pin/4-resistor smt resistor network panasonic exb-28v102jx s1 1 4-position, smt half-pitch dip switch s2 1 pushbutton switch u1, u2 2 4-channel adc (38 tssop) maxim MAX11040Kguu+ u3 1 d-flip flop u7 1 ldo regulator (8 tdfn) maxim max1976aeta160+ u8 1 controller u9 1 256kword flash memory (48 tsop) u10 1 64mb sdram (54 tsop) micron technology mt48lc4m16a2p-75 u12, u13 2 2-input positive-or gates (sot32) u14 0 not installed (8 so) y1 1 24.576mhz crystal, 18pf load y2 1 12mhz smt crystal (6mm) y3 1 32.768khz watch crystal, 12.5pf cylindrical y4 0 not installed, 24.576mhz crystal 9 shunts 1 usb high-speed a-to-b cables, 5ft (1.5m) 1 pcb: MAX11040K evaluation kit MAX11040K ev kit designation qty description c100 1 10f 10%, 6.3v x5r ceramic capacitor (1206) tdk c3216x5r0j106k c105, c106 2 18pf 5%, 50v c0g ceramic capacitors (0603) tdk c1608c0g1h180j d1, d3 2 yellow leds (0603) d2, d4 2 red leds (0603) d9 1 6.2v, 500mw zener melf diode diodes, inc. zmm5234b-7 j1 1 usb type-b right-angle pc- mount receptacle j2 1 dual-row, 14-pin header (2 x 7) j3Cj10 8 4-position terminal blocks ed100/4ds j12 1 dual-row, right-angle male header (2 x 7) j13, j14 2 dual-row, 20-pin headers (2 x 10) ju1, ju2, ju6, ju15Cju19 8 2-pin headers ju3, ju20 2 3-pin headers l1, l2 2 30 smt ferrite beads (0603) l3Cl6 4 220 smt ferrite beads (0805) murata blm21pg221sn1d r1, r2, r4Cr8, r28, r30, r49 0 not installed, resistors (0603) r3, r10, r11, r12 4 330 5% resistors (0603) r9 1 0 5% resistor (0603) r26, r27, r36, r37, r38 5 10k 5% resistors (0603) r29, r31, r32, r33, r50, r51 6 33 5% resistors (0603) r34 1 10 5% resistor (0603) r41, r42 2 27 5% resistors (0603) r43, r54, r55 3 1.5k 1% resistors (0603) r44 1 300k 5% resistor (0603) r45 1 680k 5% resistor (0603) r46, r47, r48 3 1m 1% resistors (0603) r53 1 2.2k 5% resistor (0603)
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard _______________________________________________________________________________________ 3 component lists (continued) MAX11040K daughterboard designation qty description ain0-, ain0+, ain1-, ain1+ 4 75 , 4-pin bnc female jack receptacles, 0.250in spacing (top mount) avdd, agnd, dvdd, dgnd 4 uninsulated banana jacks c1, c2, c4, c5, c10, c11, c13, c14 8 10pf 5%, 50v c0g ceramic capacitors (0603) tdk c1608c0g1h100j c3, c6, c7, c8, c12, c15, c16, c18 8 1f 10%, 10v x7r ceramic capacitors (0603) tdk c1608x7r1a105k c9, c17, c19 3 0.01f 10%, 25v x7r ceramic capacitors (0603) murata grm188r71e103k c20, c21 2 18pf 5%, 50v c0g ceramic capacitors (0603) tdk c1608c0g1h180j c22Cc29 0 not installed, capacitors (0603) d1, d3 2 yellow leds (0603) d2, d4 2 red leds (0603) j1 1 dual-row, 14-pin right-angle female connector (2 x 7) j2 1 dual-row, 14-pin right-angle male connector (2 x 7) designation qty description j3 1 dual-row, 20-pin header (2 x 10) j4Cj7 4 4-position terminal blocks ju1, ju2, ju5, ju6, ju7 5 2-pin headers ju3, ju4, ju11 3 3-pin headers r1Cr4 4 330 5% resistors (0603) (use lead-free parts only) r5 1 2.2k 5% resistor (0603) (use lead-free parts only) r6, r8 0 not installed, resistors (0603) r7 1 0 5% resistor (0603) (use lead-free parts only) s1 1 pushbutton switch u1 1 4-channel adc (38 tssop) maxim MAX11040Kguu+ u2 1 d-flip flop y1 1 24.576mhz crystal, 18pf load 8 shunts (ju1Cju5) 1 pcb: MAX11040Kdb evaluation kit supplier phone website diodes incorporated 805-446-4800 www.diodes.com murata electronics north america, inc. 770-436-1300 www.murata-northamerica.com panasonic corp. 800-344-2112 www.panasonic.com tdk corp. 847-803-6100 www.component.tdk.com component suppliers note: indicate that you are using the MAX11040K when contacting these component suppliers. file description install.exe instal l s the e v ki t fi l es on your com p uter MAX11040K.exe application program libusb.inf usb device driver file uninst.ini uninstalls the ev kit software MAX11040K ev kit files
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 4 _______________________________________________________________________________________ quick start recommended equipment ? MAX11040K ev kit (usb cable included) ? +3.3v analog supply voltage ? +3.3v digital supply voltage ? signal source from -2.2v to +2.2v ? user-supplied windows 2000/xp or windows vista pc with a spare usb port note: in the following sections, software-related items are identified by bolding. text in bold refers to items directly from the ev kit software. text in bold and underlined refers to items from the windows operating system. procedure the ev kit is fully assembled and tested. follow the steps below to verify board operation. caution: do not turn on power supplies until all connections are completed. 1) visit www.maxim-ic.com/evkitsoftware to down- load the latest version of the ev kit software, 11040krxx.zip. save the ev kit software to a tem- porary folder and uncompress the zip file. 2) make sure that the shunts of all jumpers are in the default positions, as shown in table 1. 3) connect the analog voltage supply to the avdd and agnd connectors. 4) connect the digital voltage supply to the dvdd and dgnd connectors. 5) turn on the power supply. 6) connect the negative terminal or ground terminal of the signal source to the negative input (?? on j3 (ain0 on u1), and the positive terminal of the signal source to the positive input (?? on j3. 7) set the signal source to generate a 60hz, 2v peak- to-peak sinusoidal wave. 8) install the MAX11040K evaluation software on your computer by running the install.exe program inside the temporary folder. the program files are copied and icons are created for them in the windows start | programs menu. 9) connect the usb cable from the pc to the ev kit. a building driver database window pops up in addi- tion to a new hardware found message when installing the usb driver for the first time. if a win- dow that is similar to the one described above is not seen after 30s, remove the usb cable from the ev kit and reconnect it. administrator privileges are required to install the usb device driver on windows. 10) follow the directions of the add new hardware wizard to install the usb device driver. choose the search for the best driver for your device option. specify the location of the device driver to be c:\program files\MAX11040K using the browse button. during device driver installation, windows may show a warning message indicating that the device driver maxim uses does not contain a digital signature. this is not an error condition and it is safe to proceed with installation. refer to the usb_driver_help.pdf document included with the software for additional information. 11) start the ev kit software by opening its icon in the start | programs menu. 12) wait until the program automatically detects the MAX11040K hardware and displays the user-inter- face panel (figure 1). 13) press the start conversion button in the data logging group box. 14) press the calculate button and verify that the frequency of 60hz, the min value of -1v, and the max value of 1v are displayed in the calculation group box.
evaluate: MAX11040K jumper shunt position description when to use this option 1-2* connects the on-board crystal (y1) to the crystal oscillator input and output of ic #1 (u1) when the user wishes to stimulate ic #1 modulator clock by the on-board crystal (y1) ju1 open disconnects the on-board crystal from the ic (u1) when the user wishes to stimulate ic #1 modulator clock by an external frequency 1-2 connects the xout pin of the ic (u1) to the ex_xout pad when the user-supplied external crystal connects to the ic (u1) through the ex_xin and the ex_xout pads (see also ju6) ju2 open* disconnects the ex_xout pad from the xout pin of the ic (u1) when the user wishes to stimulate the ic (u1) modulator clock by the y1 crystal 1-2 connects the drdyout pin of the ic (u2) to the co_drdyout pin on the cascading connector (j12) use this option when the ic daughterboard is connected to the ic ev kit ju3 2-3* connects the drdyout pin of the ic (u2) to the interrupt pin (int0) of the on-board controller when there is no daughterboard connected to the board 1-2 connects the xin pin of the ic (u1) to the ex_xin pad note: user-supplied external crystal may be connected to the ic (u1) through the ex_xin and the ex_xout pads when the user wishes to stimulate the ic (u1) modulator clock by an external clock or crystal, not the y1 crystal (see also ju2) ju6 open* disconnects the ex_xin pad from the xin pin of the ic (u1) when the user wishes to stimulate the ic (u1) modulator clock by the y1 crystal 1-2 connects the ain0- pin of the ic (u1) to agnd for single-ended input-signal measurement when the user wishes to make a single-ended signal measurement on ain0+/ain0- ju15 open* disconnects the ain0- pin of the ic (u1) from agnd when the user wishes to make a differential signal measurement on ain0+/ain0- 1-2 connects the ain1- pin of the ic (u1) to agnd for single-ended input-signal measurement when the user wishes to make a single-ended signal measurement on ain1+/ain1- ju16 open* disconnects the ain1- pin of the ic (u1) from agnd when the user wishes to make a differential signal measurement on ain1+/ain1- 1-2 connects the drdyout pin of the ic (u2) to the sync signal (gp5) of the controller when the user wishes to have the sync pin driven by the drdyout ju17 open* disconnects the drdyout pin of the ic (u2) from the sync signal (gp5) of the controller when the user wishes to have the sync pin driven by the controller 1-2 connects the user-supplied crystal (y4) to the crystal-oscillator input and output of the ic (u2) note: y4 is not loaded by default, but can be loaded by the user when the user wishes to clock the ic (u2) by the y4 crystal (must be loaded by the user) ju18 open* disconnects the user-supplied crystal (y4) from the ic (u2) when the user does not wish to stimulate the ic (u2) modulator clock by the y4 crystal table 1. jumper settings (ev kit) MAX11040K evaluation kit/daughterboard _______________________________________________________________________________________ 5
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 6 _______________________________________________________________________________________ figure 1. MAX11040K ev kit main window jumper shunt position description when to use this option 1-2* connects the clkout of the ic (u1) to the xin pin of the MAX11040K (u2) when the user wishes to cascade u2 with u1 ju19 open disconnects the clkout of the ic (u1) from the xin pin of the MAX11040K (u2)** when the user does not wish to cascade u2 with u1 table 1. jumper settings (ev kit) (continued) * default position. ** y4 is not loaded by default, but can be loaded by the user.
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard _______________________________________________________________________________________ 7 detailed description of software the MAX11040K ev kit? main window is shown in figure 1. the setup group box, located at the top of the window, contains configuration , sampling instant control , and output data rate control group boxes. functions related to reading single-sample adc values in the adc conversion group box are located in the middle section. data-logging functions and data calcu- lation are in the data logging group box, located at the bottom of the main window. up to five devices can be cascaded by using the daughterboards. select the number of cascaded ics from the number of devices menu item. setup all the settings in the setup group box correspond to the registers of the ic specified in the ic selection drop-down list. in the ic selection drop-down list, MAX11040K ic #1 and MAX11040K ic #2 represent the ics (u1 and u2) on the ev kit. MAX11040K ic #3 , MAX11040K ic #4 , and MAX11040K ic #5 represent the ics on the optionally cascaded daughterboards. when the ev kit software starts up, or when a different ic is selected in the ic selection drop-down list, the configuration , sampling instant control , and output data rate control group boxes display the content of the ic specified in the ic selection drop-down list. configuration in the configuration group box, the user can change the value of the configuration register in the selected ic. each checkbox in the configuration group box corre- sponds to a bit in the configuration register. click on the checkbox to toggle each bit. sampling instant control adjust the appropriate scrollbars in the sampling instant control group box to set the sampling instant delay for the input channels. output data rate control there are three panels in the output data rate control group box, and each one of them has a differ- ent way to set up the data rate of the ic. the user can select one of them by checking the corresponding radio button on the left of the panel. to set the sample rate by directly controlling the adc? register (coarse adjust and fine adjust), use the first panel at the top of the output data rate control group box. select the coarse-adjusted output data rate in the coarse adjust drop-down list, and adjust the fine adjust scrollbar to set up the output data rate. the coarse adjust drop-down list and the fine adjust scrollbar correspond to the output data rate coarse adjust register and the output data rate fine adjust reg- ister, respectively. the actual data rate is displayed in the actual data rate label. to set the sample rate by entering a desired sample rate, and letting the ev kit software calculate the clos- est possible sample rate, use the request data rate edit box. enter the desired data rate into the request data rate edit box and press the enter key. the pro- gram sets up the closest possible data rate automati- cally. the actual data rate is displayed in the actual data rate label. to set the sample rate by letting the software detect the input frequency, and adjust the sample rate to a desired number of samples per cycle, use the auto adjust sample rate group box. the software detects the frequency of the input signal on any channel select- ed in the drop-down list. set up the data rate based on how many samples per input-signal cycle was request- ed in the samples/cycle edit box. the actual data rate is displayed in the actual data rate label. adc conversion the adc value display group box, shown in the adc conversion group box, displays the output data codes and the calculated voltage values for a single sample of all of the channels on the ic specified in the ic selection drop-down list. pressing the convert button in the adc conversion group box updates the status of the adc value display group box. check the auto convert checkbox to automatically and repeatedly read the current adc value at a rate set by the time interval drop-down list. data logging start conversion the data logging group box is located at the bottom of the window. the user can select the desired number of conversions in the number of samples drop-down list. press the start conversion button in the data logging group box to start sampling at the rate that was set by the output data rate control group box. output file data the save to file button is not active until the sampling is done. after sampling is finished, and before pressing
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 8 _______________________________________________________________________________________ the save to file button, the user needs to select in the output file data group box which channels will have their sampled data saved into the file. the software keeps a record of channel selections for each ic. select the ic you wish to select in the ic selection drop-down list, to display and allow modification of channel selection for that ic. press the select all channels on all ics button to check all the checkbox- es in the output file data group box for all ics. press the deselect all channels on all ics button to clear all the checkboxes in the output file data group box. press the save to file button to save the data from the selected channels into a file. zero-crossing alignment option in the option group box, when the align to zero crossing point checkbox is checked, the program detects the rising zero-crossing point in the sampled data of the channel specified in the ic selection and channel selection drop-down lists. when the save to file button is pressed, the program saves the sampled data starting from the rising zero-crossing point. calculation after sampling is finished, press the calculate button to calculate the frequency , rms , min , max , and avg dc of the input signal of the channel specified in the ic selection and channel selection drop-down lists. the calculation for frequency uses a simple algorithm that has limitations. the frequency is calculated by mea- suring the time between two rising zero-crossing points. an error may show up in circumstances where dc offset is on the order of the input-signal amplitude, or if there is significant noise or other frequency content in the signal that creates multiple zero crossings near the fundamental crossing. to calculate these results for a different channel, change the ic selection and channel selection drop-down list and press the calculate button. clear led when any of the leds on the ev kit and the daughter- board are on, press the clear led button to turn off the leds after the overflow and the overvoltage faults are cleared. sync pulse press the sync pulse button to synchronize the output data timing for all cascaded devices. detailed description of hardware MAX11040K ev kit the MAX11040K ev kit board provides a proven layout for evaluating the ic? 4-channel, simultaneous-sam- pling adc. the ev kit comes with two MAX11040Kguu+s installed. eight terminal blocks are provided on the ev kit for all ain inputs of the on-board ics. four bnc connectors are also available for the ain0 and ain1 inputs of ic #1 (u1). up to three additional parts can be connected to the ev kit to increase the number of input channels, by cascading the daughterboards to the ev kit. see the daughterboard section for more information. power supply two separate power supplies are required to power up the ev kit. connect the analog voltage supply (from +3v to +3.6v) to the avdd connector and the analog ground to the agnd connector. connect the digital voltage supply (from +2.7v to avdd) to the dvdd con- nector and the digital ground to the dgnd connector on the ev kit. leds there are four led indicators (d1?4) on the ev kit. d1 and d2 leds reflect the real-time logic levels on the fault and ovrflw pins, respectively. d3 and d4 leds latch on the fault conditions on the fault and ovrflw pins, respectively. when d3 or d4 is turned on, press the clear led button in the ev kit software or press the on-board pushbutton (s2) to turn off the leds after the faults are cleared. all ic fault and ovrflw pins are open drain and respectively connected in a wire-ored configuration. daughterboard the daughterboard comes with one MAX11040Kguu+ installed. the user can cascade the daughterboard to the ev kit to increase the number of input channels. the software supports up to three daughterboards cas- cading to the ev kit. four terminal blocks are provided on the daughterboard for all ain inputs of the on-board ics. four bnc connec- tors are also available for the ain0 and ain1 inputs of the ic (u1).
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard _______________________________________________________________________________________ 9 jumper shunt position description when to use this option 1-2 connects the on-board crystal (y1) to the crystal oscillator input and output of the ic (u1) when the user wishes to stimulate the ic (u1) modulator clock by the on-board crystal (y1) ju1 open* disconnects the on-board crystal from the ic (u1) when the user does not wish to stimulate the ic (u1) modulator clock by the on-board crystal (y1) 1-2 connects the xout pin of the ic (u1) to the ex_xout pad when the user-supplied external crystal connects to the ic (u1) through the ex_xin and the ex_xout pads ju2 open* disconnects the ex_xout pad from the xout pin of the ic (u1) when an external crystal is not used 1-2 connects the drdyout pin of the ic (u1) to the co_drdyout pin on the connector (j2) use this option when more ic daughterboards need to be cascaded ju3 2-3* connects the drdyout pin of the ic (u1) to the interrupt pin (int0) of the on-board controller use this option on the last ic daughterboard that cascades to the ic ev kit 1-2* connects the xin pin of the ic (u1) to the ci_xin pin on the j1 connector note: ci_xin carries the clkout signal from the previous cascaded board when the user wishes to stimulate the ic (u1) modulator clock by the clkout of the previous cascaded board ju4 2-3 connects the xin pin of the ic (u1) to the ex_xin pad note: user-supplied external crystal may be connected to the ic (u1) through the ex_xin and the ex_xout pads when the user does not wish to stimulate the ic (u1) modulator clock by the clkout of the previous cascaded board table 2. jumper settings (daughterboard) cascade carefully connect the boards by aligning the ev kit? 14-pin connector (j12) with the 14-pin header (j1) of the daughterboard. gently press them together. the two boards should be flush against each other. if more daughterboards need to be cascaded to the ev kit, connect the 14-pin connector (j2) of the last daughter- board with the 14-pin header (j1) of the additional daughterboard. place the shunt on pins 2-3 of ju3 on the last daughter- board (the one farthest away from the ev kit board), and place the shunt on pins 1-2 of ju3 on all other boards (including the ev kit board). power supply two separate power supplies are required to power up the daughterboard. connect the analog voltage supply (from +3v to +3.6v) and the analog ground to the avdd and agnd connectors, respectively. connect the digital voltage supply (from +2.7v to avdd) and the digital ground to the dvdd and dgnd connectors on the daughterboard, respectively. leds there are four led indicators (d1?4) on the daughter- board. d1 and d2 leds reflect the real-time logic levels on the fault and the ovrflw pins, respectively. d3 and d4 leds latch on the fault conditions on the fault and the ovrflw pins, respectively. when d3 or d4 is turned on, press the clear led button in the ev kit soft- ware (figure 1) or press the on-board pushbutton (s2) to turn off the leds after the faults are cleared. all ic fault and ovrflw pins are open drain and respec- tively connected in a wired-ored configuration.
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 10 ______________________________________________________________________________________ jumper shunt position description when to use this option 1-2 connects the ain0- pin of the ic (u1) to the agnd pin for single-ended input signal measurement when the user wishes to make a single-ended signal measurement on ain0+/ain0- ju5 open* disconnects the ain0- pin of the ic (u1) from the agnd pin when the user wishes to make a differential signal measurement on ain0+/ain0- 1-2 connects the ain1- pin of the ic (u1) to the agnd pin for single-ended input signal measurement when the user wishes to make a single-ended signal measurement on ain1+/ain1- ju6 open* disconnects the ain1- pin of the ic (u1) from the agnd when the user wishes to make a differential signal measurement on ain1+/ain1- 1-2 connects the drdyout pin of the ic (u1) to the sync signal (gp5) of the controller when the user wishes to have the sync pin driven by drdyout ju7 open* disconnects the drdyout pin of the ic (u1) from the sync signal (gp5) of the controller when the user wishes to have the sync pin driven by the controller 1-2 connects the clkout pin of the ic (u1) to the co_clkout on the j2 connector note: co_clkout carries the clkout signal to the next cascaded daughterboard when the user wishes to carry the clkout of u1 to the next cascaded board ju11 2-3* connects the ci_xin pin on the j1 connector to the co_clkout pin on the j2 connector note: ci_xin carries the clkout signal from the previous cascaded board when the user wishes to carry the frequency from the previous cascaded board to the next cascaded board table 2. jumper settings (daughterboard) (continued) * default position.
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ______________________________________________________________________________________ 11 figure 2a. MAX11040K ev kit schematic (sheet 1 of 4)
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 12 ______________________________________________________________________________________ figure 2b. MAX11040K ev kit schematic (sheet 2 of 4)
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ______________________________________________________________________________________ 13 figure 2c. MAX11040K ev kit schematic (sheet 3 of 4)
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 14 ______________________________________________________________________________________ figure 2d. MAX11040K ev kit schematic (sheet 4 of 4)
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ______________________________________________________________________________________ 15 figure 3. MAX11040K ev kit component placement guide?op
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 16 ______________________________________________________________________________________ figure 4. MAX11040K ev kit pcb layout?omponent side
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ______________________________________________________________________________________ 17 figure 5. MAX11040K ev kit pcb layout?ayer 2
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 18 ______________________________________________________________________________________ figure 6. MAX11040K ev kit pcb layout?ayer 3
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ______________________________________________________________________________________ 19 figure 7. MAX11040K ev kit pcb layout?ayer 4
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 20 ______________________________________________________________________________________ figure 8. MAX11040K ev kit pcb layout?ayer 5
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ______________________________________________________________________________________ 21 figure 9. MAX11040K ev kit pcb layout?ottom side
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 22 ______________________________________________________________________________________ figure 10. MAX11040K ev kit component placement guide?ottom
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ______________________________________________________________________________________ 23 figure 11a. MAX11040K daughterboard schematic (sheet 1 of 2)
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 24 ______________________________________________________________________________________ figure 11b. MAX11040K daughterboard schematic (sheet 2 of 2)
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ______________________________________________________________________________________ 25 figure 12. MAX11040K daughterboard component placement guide?op
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 26 ______________________________________________________________________________________ figure 13. MAX11040K daughterboard pcb layout?omponent side
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ______________________________________________________________________________________ 27 figure 14. MAX11040K daughterboard pcb layout?ayer 2
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 28 ______________________________________________________________________________________ figure 15. MAX11040K daughterboard pcb layout?ayer 3
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ______________________________________________________________________________________ 29 figure 16. MAX11040K daughterboard pcb layout?ottom
figure 17. MAX11040K daughterboard component placement guide?ottom evaluate: MAX11040K MAX11040K evaluation kit/daughterboard 30 ______________________________________________________________________________________
evaluate: MAX11040K MAX11040K evaluation kit/daughterboard ______________________________________________________________________________________ 31 ordering information part type MAX11040Kevkit # ev kit MAX11040Kdbevkit # daughterboard # denotes rohs compliant.
maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a maxim product. no circu it patent licenses are implied. maxim reserves the right to change the circuitry and specifications without notice at any time. 32 ____________________maxim integrated products, 120 san gabriel drive, sunnyvale, ca 94086 408-737-7600 2011 maxim integrated products maxim is a registered trademark of maxim integrated products, inc. evaluate: MAX11040K MAX11040K evaluation kit/daughterboard revision history revision number revision date description pages changed 0 11/11 initial release

▲Up To Search▲

Price & Availability of MAX11040K

	To Download MAX11040K Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .